FlexRadio Review

I have both the Flex-6400 and Flex-6600; both arrived in 2020 during a pandemic, so they have seen substantial use. They’ve both been used during contests, some of which were serious efforts. I also have the Power Genius XL amplifier, which has been similarly used.

The features of each piece of hardware is different to some degree, but they all interoperate beneath FlexRadio’s proprietary SmartSDR. As they are all linked and function together, I figured the best way to review this equipment would be a “sixty-thousand foot” -view — things I like and don’t like about the entire Flex experience, instead of getting into the nitty gritty.

SmartSDR – The Software

I am impressed with SmartSDR. As a stalwart of knobs and switches, I thought the learning curve would be difficult. I even purchased the FlexControl knob, fearing that I would be uncomfortable using the mouse. That turned out to be untrue! The software is incredibly user friendly.

The ability to see the whole spectrum and to zoom in/out is indescribable. I cannot remember contesting without it! It makes finding multipliers effortless, but where it really excels is in finding a clear run frequency. I can QSY and find a clear frequency within seconds — that is perhaps the most unexpected utility I’ve yet found.

The only drawback, of course, is that the program is only as good as your computer. I purchased a new dedicated desktop for this, and it functions well. If I were using a laptop that shared radio, work, and personal functions, maybe I would have experienced more trouble. If you’re spending this type of money on Flex gear, however, you should consider buying a dedicated machine.

Flex-6400, Flex-6600, PGXL – The Hardware

The first thing you’ll notice is that the physical radio weighs practically nothing. All connections are located on the rear panel. Overall, the rig looks sharp, but unassuming. Non-ham visitors here often mistake it for a computer, especially given the low-level whir of the cooling fan.

The biggest unexpected advantage of the radio is what it eliminates. Prior to Flex gear, I was using dated Yaesu FT-1000MP radios that required soundcard interfaces and associated cables, breakout boxes to bring band data to different devices, and RS-232 connections to the computer. All of that is now unnecessary; the radio is connected directly to my home network and can be found by any device, even over WiFi. A single USB connection sends band data to the Hamation network. Soundcard interfacing is done completely internally via Flex’s DAX utility.

The main difference between the 6400 and 6600, at least in my usage, is that the 6600 has more slices available and can do SO2R all by itself. The receiver is slightly better than the 6400 as well, but after listening side-by-side, I’m sure this would only matter in very specific circumstances. If you are a casual operator, DX chaser, or single-rig contester, the 6400 is a great deal and you’ll be pleased with it.

The single-box SO2R capability of the 6600 sync up with the Power Genius XL perfectly. When someone complains about the price of Flex gear, I remind them that the 6600 and PGXL are essentially two radios and two amplifiers; if you do the math, you’re saving money already. Add in the cost savings of not having to buy an SO2R audio interface and the complexities of dealing with OTRSP, interconnections, and building cables, and you’ve stumbled upon the real value.

The 60,000-foot view

What I LikeWhat I Don’t Like
SmartSDR. Very intuitive yet powerfulSoftware upgrades. Common and a pain.
SO2R with one boxOccasional glitches — this is a computer after all
Integration between gearPGXL fan noise is very, very loud
Elimination of interface equipmentRemote exclusively via Flex’s system & servers
Flex support is very responsive and very fastLead time on new products

This is a living post; I’ll be adding to it as time goes on.

Leave a Reply

Your email address will not be published. Required fields are marked *